Box-conveyors

Gravity conveyor with 50 mm rolls suitable for normal box handling. The rollers have a ⌀8 spring loaded shaft end and bearing housings with steel balls adapted to roll easily even for lightweight goods. Choose plastic rollers if there is a requirement for quieter rolling, otherwise steel rolls that can withstand more loads. The side profiles are 70 mm high, with a hole pitch for the rollers of c/c 26.3 mm. The roller bed is 5 mm above the side profiles. Delivered unassembled with side profiles, rolls and assembly details. NB! Leg support and end stop are not included, and are to be ordered separately.

Gravity conveyors create efficient flows. Both for moving goods but also as a storage area. The leg supports are adjustable in height and the roller bed can be adjusted to provide the required gravitational assistance to the goods you want to move. With a slight inclination, you get help manually pushing a package at a packing station. With a larger gradient, the goods will roll away solely by gravity.
In order for your goods to roll easily, it should always be in contact with at least three rollers. Place the rollers with a c/c dimension which is the minimum width of the box divided with three. If the bottom of the box is uneven, or soft, the spacing must be tighter.
Our conveyors are delivered in three lengths. If that is not enough to create the required total length, you can cut the side profiles yourself to your requirements. The load capacity is limited either by the side profiles or by the load capacity of the rolls, and is stated as load per meter for a spreaded load. Extra leg supports gives less deflection of the side profiles, therefore the load capacity per leg support spacing is indicated.

Filter a conveyor that suits you in our product search, click here!

Box Conveyros - Leg support & accessories

Our legrests are steplessly adjustable in height and are available in five different height buckets with roller bed height from 385 mm up to 1475 mm. 

For longer conveyors and for steeper slopes, two or more different leg support heights may be required to achieve the desired inclination. The legs are dimensioned for handling normal boxes that can be lifted by hand. They can be fastened to the floor to stand steadily, but must be protected against horizontal loads such as collisions with fork lift.

Connection kit for assembly of conveyors without leg support. Not needed if our leg supports are used, which in themselves is a connection kit.

Our end stops are dimensioned for small inclination on the conveyor, preventing goods from tipping over the edge.

The wheel kit makes your conveyor mobile. Please note that the roller bed height increases by 128 mm.

Filter a conveyor that suits you in our product search, click here! 

Pallet conveyors

Gravity conveyors with 60 and 80 mm rolls suitable for easier pallet handling. The shaft end of the rollers has an internal thread M10x20 and bearing housing with steel balls adapted to roll easily even for lighter pallets. The side profiles are 160 mm high. The roller bed is 5 mm above the side profiles. Delivered unassembled with side profiles, rolls and assembly details. NB! Leg support and end stop are not included, and are to be ordered separately.

Gravity conveyors create efficient flows. Both for moving goods but also as a storage area. The leg supports are adjustable in height and the roller bed can be adjusted to provide the required gravitational assistance to the goods you want to move. With a slight inclination, you get help manually pushing a package at a packing station. With a larger gradient, the goods will roll away solely by gravity.
In order for your goods to roll easily, it should always be in contact with at least three rollers. Place the rollers with a c/c dimension which is the minimum width of the pallet divided with three. If the bottom of the pallet is uneven, or soft, the spacing must be tighter.
Our conveyors are delivered in three lengths. These can be joined together with the leg supports or our connection kit. If that is not enough to create the required total length, you can cut the side profiles yourself to your requirements. The load capacity is limited either by the side profiles or by the load capacity of the rolls, and is stated as load per meter for a spreaded load. Extra leg supports gives less deflection of the side profiles, therefore the load capacity per leg support spacing is indicated.

Filter a conveyor that suits you in our product search, click here!

Pallet conveyors - Leg support & accessories

Our leg supports are steplessly adjustable in height. They are available in two different heights, for roller bed height 375-475 mm and 775-875 mm. The lower leg supports are intended for the handling of europallets and the higher for smaller pallets.


The leg supports are designed for the handling of lighter pallets. They can be fastened to the floor to stand steadily, but must be protected from horizontal loads such as collisions with a fork lift.

Connection kit for assembly of conveyors without leg support. Not needed if our leg supports are used, which in themselves is a connection kit.

Our end stops are dimensioned for small inclination on the conveyor, preventing goods from tipping over the edge.

Filter a conveyor that suits you in our product search, click here! 

Flexible conveyor

Flexible conveyor with plastic skate wheels 50 mm suitable to handle general cargo as boxes and palettes with a flat bottom. The extendable gravity conveyor can be bent in curves, it is delivered in width 500 mm, outside width 586 mm. Every second leg support is delivered with braked castors. The center to center distance in between the wheel axels are, in case of fully elongated conveyor, 125 mm. The conveying bed height can be adjusted to 800 – 1000 mm.

Filter a conveyor that suits you in our product search, click here!

Wheel Tracks

Gravity wheel track with cast-iron cast iron wheels adapted for the handling of heavy goods with flat and hard bottom, such as timber packages and house modules. Double galvanized steel profiles L-100x50x6 mm in standard length 3000 mm. The fastening hole spacing for the wheels is 50 mm. The steel profiles are in each end provided with threaded holes M12 for height adjustment, and 13 mm mounting holes for fixed mounting to the floor. (Additional attachment holes are in the middle)

Wheel tracks are usually used in pairs, parallel assembled to the floor, but for heavier or wider loads, three or more may be required. Often a U-profile is used as a load carrier between the goods and the wheels. It may sometimes be appropriate to merge the wheels tracks together to create a stabile unit.

The load capacity of the wheel track is calculated per wheel.

Filter a wheel track that suits you in our product search, click here! 

Plastic and Steel Rollers

Rollers in diameter 50 mm used for the handling of lightweight goods. The rollers have a spring loaded shaft end and bearing housings with steel balls adapted to roll easily even for lightweight goods. Choose plastic rollers if there is a requirement for quieter rolling, otherwise steel rolls that can withstand more loads.

Steel rollers in diameter 60 and 80 mm can be used for both handling of boxes or pallets. The rollers have in the shaft end an internal thread M10x20 and are suitable for the handling of lighter pallets.

Filter a roller that suits you in our product search, click here!